Graphic PIZiadas

Graphic PIZiadas

My world is in..

Effects of reflection in water : Baseline : Software Sqirlz Water Reflections

The reflection of light on a surface responds to a simple geometric pattern. The axial symmetry about a plane or can explain and calculate their behavior.
Software Sqirlz Water allows images reflected using these patterns of behavior of light, as we have seen to enter the “reflection in water

reflejos_1The model used for analyzing use a simple scene composed of a viewpoint (V..) in which is located the observer or camera, an object to reflect (tree) and a reflecting plane which acts as a mirror.

A ray from the camera “bounce” on the ground at a point which also shows the surface normal (N).

reflejos_2The angle of incidence of the beam on the mirror surface visual (espejo) this way the same angle as the reflected beam.

Often, and to apply the so-called “ley the fast“, is usually referred to complementary angle, or angle to the normal to the plane or reflective surface at each point (perpendicular).

reflejos_3To calculate the reflected direction must obtain the symmetric (In ') viewpoint (V..) with respect to the ideal plane that serves as a mirror.

The new address, as can be verified by elementary trigonometry, pass through the imaginary point and the point of incidence of the original beam.

If instead of considering a full beam ray, the model is generalized in the same way.

reflejos_4Moving the reflection plane, shifting the set of rays reflected and therefore the resulting image will be displaced.

 

To change the position of theoretical reflection, Sqirlz Water has a feature that lets you turn it into their software called “Base Line”.
This line does not change the area in which reflection occurs, but the part of the image that will be reflected.

When activated, change the icons that let you change the position of this line string, indicating that can be used (going to be in gray to have a certain color “active” )

The available functions are:

Define a polygonal (base line). With the left mouse button will introduce our polygon vertices, while the right mouse button will indicate that we have finished defining the “base line”

Add new segment to the polygon. Lets go by defining a more elaborate and complex contour.

Mover or trasladar the polygonal. Is equivalent to modifying the position of the reflection plane.


Soften the traverse. Instead of the straight and corner polygonal interpolate a curve which avoids the effects of “straight lines at the edges”.

Consider an example the results of position and re polygonal (base line) in different cases.

First we define the area to reflect the scene, as explained to perform the first example of reflection in water.

In the first example does not activate the “base line”, so that it is placed at the top of the area (red) in which reflection occurs. Is the normal case of use of this technique.

The result is shown in the following image:

If activate the reflection plane displacement (base line) for example to place it in the middle of the building height, see how the reflection moves to start in this position. The line shown in dashed red and white colors

 

The reflection is unreal, as seen in the new image, displacement does not correspond to what we would see in a photograph, but can be used as an enhancement effect or modifying the apparent position of objects.

 

Last, didactic example, see a case in which the polygonal line has done so “ravine”, producing a new reflection effect distortion.

 

The result can be seen in this last image.

 

This technique produces animated images from stills, but also applies in videos or short sequences.
The imagination of each author will obtain spectacular results reflection of beauty.
Want to experience these new effects?